2018 enclave - want to install trailer brake controller
Join the discussion
Recommended Reading
-
Set screw for rear rotors
General TechA shot in the dark but does anybody know the exact set screw needed to plug the hole and use a 3/8 to remove the rotor from the hub? Sorry but maybe I'm missing something, need more info than 8mm....and don't want to buy an entire set..... :drunk:- 9
- 2K
-
Noise in front end
General TechI posted here about a year ago on the subject of front suspension noise. At that time I was looking at replacing the front stabilizer bar links, due to a clicking noise over bumps at low speed. This is with a slight suspension twist that causes body roll. Now I am looking a front end groan...- 2
- 63
-
Headlights quit
General TechMy wife's 2010 Enclave headlights quit, low and high beams. Fuses and relays are good. I changed the headlight switch on the dash, no joy. I can hear the dimmer switch thumping under the hood when operated. DRLs work in the sunlight and switch off when sensor is covered. With all headlights...- 5
- 154
-
Sluggish Start
General Tech2011 with approx 122K (kilometers). Its been a pretty cold winter so far, with mornings starting off at almost -20C. Wife said the Enclave was somewhat difficult to start, and actually didn't start once or twice while attempting to crank. Figured it was the battery.... so we picked up a new...- 10
- 3K
-
2008 Enclave, no power at all, battery seems good.
General TechOriginal battery was replaced last fall. Same condition today. Horn doesn't work, key locked in ignition, no lights, no crank, nothing. Worked fine yesterday. Plugged in my battery maintainer to the posts in the engine bay. It says the battery is charged. So I'm getting power to that point...- 2
- 2K
Join now to ask and comment!